Estimated time:
0.05h
Estimated cost:
$50
Applicable models:
1998-2006 Audi TT MK1
Tools used:
Torx-20
Parts used:
In this article we will go through the steps on how to remove the shift boot from your 2001 Audi TT MK1. This process is very simple it should only take a few minutes. If you find this article useful please be sure to share this article with your friends or comment below.
For more videos: https://www.youtube.com/channel/UCWr_e9A664ptIkV_4LlJxWw
For more blog posts: https://blog.wolfautoparts.com
Facebook: https://www.facebook.com/wolfautoparts/
Twitter: https://twitter.com/WolfAutoParts
Instagram: https://www.instagram.com/wolfautoparts/
Snapchat: @wolfautoparts
Procedure
-
Step 1: Using your Torx-20 bit, remove all bolts around the retaining ring
-
Step 2: Once the bolts are out, remove the retaining ring surrounding the boot. Then, Gently peel the rubber base from the center console.
-
Step 3: Before you can remove the full shifter boot, you will need to remove the shifter knob. Simply unscrew the shifter knob, then remove the shifter boot. 🙂
